MotorKote All Purpose Spray Lubricant 12 oz
Made for metal-to-metal friction, MotorKote® All-Purpose Spray Lubricant made with MotorKote® Hyper Lubricant® is a superior solution to help prevent friction, wear, noise, rust & corrosion on metal parts. Resists water washout and lasts much longer than basic all-purpose spray lubricants and lubricates just about anything.
Made for metal-to-metal friction, MotorKote® All-Purpose Spray Lubricant made with MotorKote® Hyper Lubricant® is a superior solution to help prevent friction, wear, noise, rust & corrosion on metal parts. Resists water washout and lasts much longer than basic all-purpose spray lubricants and lubricates just about anything. Designed to reduce friction in hundreds of conditions, it soaks into many surfaces adding a layer of lubrication. Works in extreme heat & cold.
DO NOT use in any brake systems or on low-grade plastics and rubber.
SMALL ENGINES / MOTORS / MECHANICAL MOVEMENTS / TRANSMISSIONS / TRANSFER CASES / GEARS / WET CLUTCHES / ALL- PURPOSE LIGHTWEIGHT OIL / REPLACES 3-IN-1 OIL & OTHER GENERAL ALL-PURPOSE OILS / CUTTING OIL / INTRICATE MECHANISM LUBRICANT / GUN OIL / SHOP LUBRICANT / GENERAL PURPOSE LUBRICANT / SCISSORS / VALVES / BELTS / ELECTRICAL CONNECTIONS / LOCKS / HINGES / DOORS / WINDOWS / GATES / DRAWERS / FANS / ELECTRICAL MOTORS / DRILL BITS / MODELS / ARTS & CRAFTS / AIR / MARINE / RAIL / OFF-ROAD / INDUSTRIAL / EMERGENCY AND OTHER TRANSPORTATION VEHICLES / DEVICES OR EQUIPMENT / RACING / HEAVY DUTY / EXTREME CONDITIONS / GAS, DIESEL, ALCOHOL, STEAM & ELECTRIC ENGINE APPLICATIONS
* Please note a small amount of foam often is dispensed on new cans, this due to the higher percentage of propellant that has risen to the valve of the can, for best use keep cans at room temperature not cold/frozen
DIRECTIONS: Hold upright, press firmly on spray nozzle, apply where needed.
PINPOINT APPLICATION: Firmly insert extension tube into hole in spray nozzle.
TEST SMALL INCONSPICUOUS AREAS: May harm low-grade plastics and rubbers. It can also stain or discolor fabric.
Warning: Not for sale in California.
KEEP OUT OF REACH OF CHILDREN.
DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED OR INHALED. VAPOR HARMFUL. CONTENTS UNDER PRESSURE. Do not spray near sparks, heat or open flame. Vapor may ignite explosively. Do not smoke. Extinguish all flames, electronic motors and other sources of ignition during use and until vapors are gone. Do not puncture or incinerate container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not store at temperatures above 120º F. Use adequate ventilation. Do not breathe vapors or spray mist. Do not induce vomiting. Call a physician immediately. Avoid contact with eyes, skin and clothing. Safety data sheet available on request. FIRST AID: Contains (CAS#): Heptane (142-82-5), Petroleum Distillate (6472-47-8) Isobutane (78-28-5) Propane (74-98-6). It can also stain or discolor fabric.
MotorKote Gun Oil
MotorKote Gun Oil is infused with MotorKote Technology which provides the best wear reduction that protects under the harshest weather and firing conditions.
Provides a smooth action for reliable performance and improved efficiency, all while cleaning and reducing powder and grime buildup.
The perfect solution for all metal parts including slides, actions, barrels, bores, and triggers.
Like all MotorKote products, this one is also made in America.