Made for metal-to-metal friction, MotorKote® All-Purpose Spray Lubricant made with MotorKote® Hyper Lubricant® AMERICA'S #1 FRICTION FIGHTER™ and is a superior solution to help prevent friction, wear, noise, rust & corrosion on metal parts.

Resists water washout and lasts much longer than basic all-purpose spray lubricants and lubricates just about anything.

Designed to reduce friction in hundreds of conditions, it soaks into many surfaces adding a layer of lubrication.

Works in extreme heat & cold. 

DO NOT use in any brake systems or on low-grade plastics and rubber.

INFINITE USES: 

SMALL ENGINES / MOTORS / MECHANICAL MOVEMENTS / TRANSMISSIONS / TRANSFER CASES / GEARS / WET-CLUTCHES / ALL- PURPOSE LIGHTWEIGHT OIL / REPLACES 3-IN-1 OIL & OTHER GENERAL ALL-PURPOSE OILS / CUTTING OIL / INTRICATE MECHANISM LUBRICANT / GUN OIL   / SHOP LUBRICANT / GENERAL PURPOSE LUBRICANT  / SCISSORS / VALVES / BELTS / ELECTRICAL CONNECTIONS / LOCKS / HINGES / DOORS / WINDOWS / GATES / DRAWERS / FANS / ELECTRICAL MOTORS / DRILL BITS / MODELS / ARTS & CRAFTS / AIR / MARINE / RAIL / OFF-ROAD / INDUSTRIAL / EMERGENCY AND OTHER TRANSPORTATION VEHICLES / DEVICES OR EQUIPMENT / RACING / HEAVY DUTY  / EXTREME CONDITIONS / GAS, DIESEL, ALCOHOL, STEAM & ELECTRIC ENGINE APPLICATIONS

* Please note a small amount of foam often is dispensed on new cans, this due to the higher percentage of propellant that has risen to the valve of the can, for best use keep cans at room temperature not cold/frozen 

DIRECTIONS: Hold upright, press firmly on spray nozzle, apply where needed.

PINPOINT APPLICATION: Firmly insert extension tube into the hole in the spray nozzle.

TEST SMALL INCONSPICUOUS AREAS: May harm low-grade plastics and rubbers. It can also stain or discolor fabric.

Now Available for sale in California.

KEEP OUT OF REACH OF CHILDREN.

DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED OR INHALED. VAPOR HARMFUL. CONTENTS UNDER PRESSURE. Do not spray near sparks, heat, or open flame. Vapor may ignite explosively. Do not smoke. Extinguish all flames, electronic motors, and other sources of ignition during use and until vapors are gone. Do not puncture or incinerate the container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not store at temperatures above 120º F. Use adequate ventilation. Do not breathe vapors or spray mist. Do not induce vomiting. Call a physician immediately. Avoid contact with eyes, skin and clothing. Safety data sheet available on request. FIRST AID: Contains (CAS#): Heptane (142-82-5), Petroleum Distillate (6472-47-8) Isobutane (78-28-5) Propane (74-98-6). It can also stain or discolor fabric. 

MotorKote® Fuel Optimizer® was formulated to offset the diminishing quality of fuel and remove harmful deposits that rob your injectors of power and performance. Helps your fuel burn CLEANER AND HOTTER for better fuel economy and performance.

1 gallon (128 fl oz)

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

MotorKote® All Seal™Stop Leak is formulated with synthetic conditioning agents to help soften and expand most worn and dried seals, to stop leaks in engines, transmissions and power steering systems. MotorKote® All Seal™Stop Leak contains NO SOLIDS that could clog or plug filters and lines. Safe and compatible with mineral and synthetic fluids, as well as, all types/grades of motor oil.

CAN BE USED AS A PREVENTATIVE

Uses:

• Engine 

• Power Steering 

• Transmission 

• Differentials

• Crankshaft Main Seals 

• Rack & Pinion 


Directions/Application:

• Shake before using.

• Keep engine off, check current fill levels, some fluid may need drained or siphoned to obtain proper treat ratio.

Engines/Transmissions: Add full 8 oz bottle of MotorKote All Seal for every 6 quarts of oil / transmission fluid.  Do not overfill.

Power Steering: Add 2 oz’s of MotorKote All Seal for every 1 quart of fluid.  Do not overfill.

Small Capacity engines (non-automotive): Add 2-4 oz’s total. 

* DO NOT USE IN BRAKE SYSTEMS OR RADIATOR COOLING SYSTEMS

* Avoid contact with painted surfaces, skin or eyes.

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

MOTORKOTE Upper Cylinder was formulated to bring additional upper cylinder lubrication and to clean fuel injectors and prevent deposits from forming. 

Compatible in both fuel and diesel engines and more concentrated fuel cleaning capability than the brand leader.

BENEFITS

• Increases Horsepower

• Removes Valve Stem Gum

• Reduces carbon build up the cause of: Pre-ignition, power loss, burned valves, broken rings

• Restores Power and engine performance

• Increases fuel efficiency

• Cleans injectors to Reduce: Power loss, hesitations, pinging/dieseling, loss of fuel economy

 MOTORKOTE Upper Cylinder Lubricant & Fuel Injector Cleaner,  is safe for use in all catalytic converters, carburetors, and fuel injection systems and will not void warranties.

RECOMMENDED USAGE:

Add full 5 ounces to 25 Gallon Fuel Tank every fill-up, maintain the ratio of 1 ounce per 5 Gal of fuel (Gas or Diesel).

Can be used with MotorKote Fuel Optimizer or MotorKote Low Sulfur Lube in Diesel engines, alternate products between fill-ups.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Cumene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

MotorKote® TireKote™ is an extreme tire shine and protectant. TireKote™ not only gives your tires a brilliant deep gloss black shine but conditions and protects the tire to help prevent drying and cracking.

DEEP GLOSS BLACK SHINE: Delivers super-glossy protective coating for a deep, dark, insanely wet look
PREVENT BROWNING: Synthetic polymers and specially designed antiozonants create a mirror-like shine that prevents browning and premature aging
ADVANCED TECHNOLOGY: Advanced resin technology bonds the slick protective coating to the tire for long-lasting shine
EASY AEROSOL SPRAY: Convenient and easy-to-use aerosol dispenser allows you to simply spray and walk away
WASH-RESISTANT: Formula resists washing off and fading to help maintain your tires’ deep, dark wet look

EASY TO USE APPLICATION: Hold can 6” to 10” away from the tire and spray evenly on a clean, dry tire. Allow product to dry for at least 5 minutes. No need to wipe. FOR BEST RESULTS: Let stand 10 minutes. Repeat application for maximum shine.

MotorKote Gun Oil is infused with MotorKote Technology which provides the best wear reduction that protects under the harshest weather and firing conditions.

Provides a smooth action for reliable performance and improved efficiency, all while cleaning and reducing powder and grime buildup.

The perfect solution for all metal parts including slides, actions, barrels, bores, and triggers. 

Like all MotorKote products, this one is also made in America.

Formulated to protect and treat the Catalytic Converter & Exhaust System from oil poisons. This will aid in reducing the carbon footprint of your vehicle and improving overall performance; helping to  increase fuel efficiency, and protect your converter. 

BENEFITS:

• Use when warning light is activated
• Use before or prior to replacing catalytic converter
• Protects catalytic system from oil poisons
• Reduces phosphorus & zinc retention levels at catalyst inlet
• Helps clean oxygen ( O2 ) sensor(s)
• Lowers tail pipe emissions
• Works great for P0420 Catalytic Converter Code
 

RECOMMENDED USAGE:

Add full bottle into 16 gallons of fuel or 1 oz. per gallon. 

Last up to 6 months or 7,000 miles (which ever comes first.)

This gasoline additive is safe for use in all gasoline engines, all catalytic converters and oxygen sensors, when used as directed.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

MotorKote Heavy Duty Motor Treatment is to be used in all gas, diesel, ethanol fuels, and in engine oil crankcases. 

• Cleans & removes harmful carbon deposits, gums, & varnishes

• Removes moisture from fuel & oil

• Restores lost performance

• With added fuel stability protection

100% pure petroleum product treats both gasoline & diesel engines including 2 & 4 cycle engines, carburetors, fuel injected gasoline engines, automobiles, trucks, boats / marine, tractors, motorcycles, lawn & garden machinery and industrial engines.

• Removes fuel system deposits and residues 

• Cleans fuel injectors & carburetor jets

• Stabilizes & conditions fuels - use for

• engine storage (lasts up to 2 years)

• Cures hesitations, stalls, pings & rough idle

• due to carbon buildup

• Frees sticking /noisy lifters & rings

• Cleans PCV valve system

• Increases RPM’s vacuum & compression

• Lubricates upper cylinders

• Helps de-ice fuel

• Cleans intake valves & pistons

• Removes catalytic converter odors

• EPA registered

Will not harm engine components, catalytic  converters, seals, gaskets, or oxygen sensors

DIRECTIONS:

CRANKCASE - INTERNAL ENGINES USE ONLY. DOES NOT REPLACE OIL. 

Works with all types of oil: Conventional, Semi & Full Synthetics

Treats up to 10 quarts of oil - 1.5 oz. per quart 

FUEL TANK

16 oz. treats up to 25 gallons of fuel

1 oz. per gallon ( Gas & Diesel )

SMALL ENGINES - 2 & 4 Cycle Engines

1 oz. per gallon ( Gas & Oil Mix )

DOES NOT REPLACE 2 CYCLE OIL.

VACUUM INTAKE CLEANER

May be used with engine decarbonizing equipment through the vacuum system to clean intake manifold, valves and combustion chamber. Follow recommended mechanical procedures for the equipment.

FREQUENCY OF USE

Every 3,000-5,000 miles

CONTENTS HARMFUL. CONTENTS MAY CATCH FIRE. MAY IRRITATE SKIN AND EYE. Do not swallow. Do not smoke. Do not mix with other chemicals. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. KEEP OUT OF REACH OF CHILDREN. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Keep away from flames, such as a pilot light, and any object that sparks, such as an electric motor. To open-push tabs and twist left. To close-twist right until tight. FIRST AID: Contains petroleum distillates and isopropanol. If swallowed, call a doctor or Poison Control immediately (800) 222-1222. Do not induce vomiting. If in eyes, flush with water for 15 minutes, removing contact lenses (if present), after the first 5 minutes. If on skin, wash thoroughly with soap and water. If inhaled, move to fresh air. If irritation persists for any exposure, call a physician. 

Warnings:

Proposition 65 Warning for California Consumers: Fuel Optimizer

⚠️WARNING: This product can expose you to chemicals including Benzene, Ethylbenzene, which are known to the State of California to cause cancer and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

MOTORKOTE Upper Cylinder was formulated to bring additional upper cylinder lubrication and to clean fuel injectors and prevent deposits from forming. 

Compatible in both fuel and diesel engines and more concentrated fuel cleaning capability then the brand leader.

BENEFITS

• Increases Horsepower

• Removes Valve Stem Gum

• Reduces carbon build up the cause of: Pre-ignition, power loss, burned valves, broken rings

• Restores Power and engine performance

• Increases fuel efficiency

• Cleans injectors to Reduce: Power loss, hesitations, pinging/dieseling, loss of fuel economy

MOTORKOTE Upper Cylinder Lubricant is safe for use in all catalytic converters, carburetors, and fuel injection systems and will not void warranties.

RECOMMENDED USAGE:

Add full 5.25 oz bottle to 25 Gallon Fuel Tank every fill-up or as needed. on most passenger vehicles. Larger (Diesel) engines use 1 ounce per 5 Gal of fuel.

Can be used with MotorKote Fuel Optimizer or MotorKote Low Sulfur Lube in Diesel engines, alternate products between fill-ups.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Cumene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Improves fuel quality in all diesel engines. Cleans and increases performance.

BENEFITS:

• Removes harmful deposits and prevents breakdown of fuel

• Boosts Cetane up to 7 points

• Cleans dirty injectors 

• Effective in all Diesel fuels including: Ultra Low Sulfur Diesel fuels (ULSD), bio diesels and bio diesel blends

RECOMMENDED USAGE:

• Add 1 oz per 5 Gallons of fuel for up to a 7 point increase

• Add 1 oz per 10 Gallons of fuel for up to a 3 point increase

DON’T REPLACE YOUR FOULED INJECTORS UNTIL YOU TRY THIS FIRST.

100% Guaranteed to Remove Stiction

Injection Stiction occurs when oxidation & carbon build-up form inside (oil-side) the injector. This is related to newer injection technology that runs hotter & causes the oil side of the injector to stick or foul. MotorKote® Diesel Stiction Remover™ removes carbon build-up & provides a coating to eliminate friction in diesel injectors.

BENEFITS:

• Often Restores Fouled Injectors

• Helps Restore Lost Power & Compression

• Fights Deposit Build-up

• Neutralizes Harmful Engine Acids

• Reduces Frictional Drag

• Helps Prevent Excessive Wear

• Helps Prevent Build-up of Harmful Chemical Oxidation

• Helps Reduce Noise & Vibrations in Lifters & Valves

• Reduces Blow-by & Helps Smooth Idle

RECOMMENDED USAGE:

• Initial cleanup in Pickup Truck replace 64 fl oz of oil with Diesel Stiction Remover®
• Prevention replace 32 fl oz of oil
• Initial cleanup in Semi Truck replace 128 fl oz of oil with Diesel Stiction Remover®
• Prevention replace 64 fl oz of oil

DIRECTIONS: 

Shake before using. Pour in Oil / Crankcase. Use every 3rd oil change.

Complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road, locomotive, and marine diesel equipment engines.

100% GUARANTEED to remove stiction within 4,000 miles or you will receive a full refund for the product.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene, and Ethylbenzene which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

MotorKote® DEF Reducer™ is a Diesel Fuel Additive that helps reduce regen. burn cycles and extend Diesel Particulate Filter (DPF) life. 

SAFE & EFFECTIVE FOR USE IN ALL DIESEL FUELS

While using MotorKote® DEF Reducer™ the combustion fuel catalyst allows the fuel to burn clean and efficiently with minimal soot and contamination. This ultra-concentrated diesel additive helps reduce the need for regenerative burn cycles and helps reduce DEF usage and extending diesel particulate filter life. Regenerative burn cycles lead to downtime and other excessive costs. *Use of this product will assist in keeping your DPF (Diesel Particulate Filter) clean. *A clean DPF will reduce DEF consumption.*Use of this product will reduce Regenerative Cycles. *Reduced Regen cycles will reduce DEF consumption.

BENEFITS:

Helps:

• Reduce Regenerative Burn Cycles Up To 80%
• Reduces DEF Usage
• Extend Particulate Filter Life
• Reduce Downtime Costs

• Effective in all diesel fuels including ULSD and biodiesel blends containing up to 20% biodiesel (B20)

• Ultra Low Sulfur Diesel (ULSD) Compliant Ultra-Concentrated Formula

 

DIRECTIONS: Use in Diesel Fuel Tank Only. 

DO NOT USE IN DEF TANK.

Minimum Treatment: Use 1 oz. / 10 gallons of diesel fuel.

Maximum Treatment: Use 1 oz. / 5 gallons of diesel fuel.

Use every fill-up.

This diesel fuel additive complies with the low sulfur content requirements for use in diesel motor vehicles & non-road engines.

MotorKote Low Sulfur Lubricant totally cleans the fuel injection system and carburetors in diesel engines and restores lost fuel pump lubrication to your system.

Formulated to address the Ultra Low Sulfur Diesel Fuel (ULSD) Issues of diminishing quality diesel fuel.

BENEFITS

• Lubricates restores lost lubrication to fuel pump

• Decreases Ignition Delay and improves startup

• Reduces carbon build up the cause of: Pre-ignition, power loss, burned valves, broken rings

• Adds horsepower and torque

• Increases fuel efficiency and raises cetane

• Cleans injectors to Reduce: Power loss, hesitations, pinging/dieseling, loss of fuel economy

Safe for all diesel engines and will not void warranties.

RECOMMENDED USAGE:

Add 1 oz per 10 gallons of diesel fuel every 3^rd fill-up.  1 16 oz bottle treats 160 gallons of diesel fuel

Can be used with MotorKote Fuel Optimizer in Diesel engines, alternate products between fill-ups.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

MotorKote Anti-Gel and Conditioner is highly concentrated and formulated to prevent fuel from Gelling in cold temperatures and works an excellent Ultra Low Sulfur Diesel (ULSD) supplement

BENEFITS:

• Replaces Lost Lubricity
• Displaces Water in Fuel
• Improves Combustion
• Increases Power
• contains no alcohol or harmful solvents
• Compatible with all Filters including Particulate
• Reduces Blow-by & Helps Smooth Idle

RECOMMENDED USAGE:

• Safe and Effective with Bio Diesel and ULSD.  
• Passenger Vehicles or Pickups use 1 oz per 2.5 Gal in all temperatures.
• Semi Trucks use 1 oz per 2.5 Gal of fuel below 0 F, use 1 oz per 5 Gal above 0 F
• Highly recommended with MotorKote Hyper Lubricant

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

MotorKote® Heavy Duty Oil Stabilizer - 1 QT / 32 FL OZ  (946 mL)

ITEM # MK-50960-06

• Helps Eliminate Dry Starts
• Reduces Smoking, Knocking & Oil Consumption in Worn Engines
• Compatible With Synthetic & Non-synthetic Automotive Lubricants
• Uses Cold Fusion Technology
• Can Be Used in Conjunction with Motorkote® Hyper Lubricant

100% pure petroleum product increases oils viscosity and is safe in all gasoline and diesel engines while adding lubricity to any type of oil. Using MotorKote Heavy Duty Oil Stabilizer regularly will help extend engine life, resist thermal breakdown, lower oil temperatures, raise oil pressure and reduce oil consumption and improve fuel economy. Cold Fusion Technology is an advanced pour point depressant that allows for better flow and performance during lower temperatures. 

DIRECTIONS  

ENGINE OIL CRANKCASE:

1 quart with every 4 quarts motor oil.

FREQUENCY OF USE:

Every oil change - Can be used in conjunction with motorkote hyper lubricant.

OTHER USES:

Use up to 20% of system capacity for light duty manual transmissions, lawnmowers, and air compressors.

Use up to 50% of system capacity for heavy duty transmissions, differentials, and transfer cases.

KEEP OUT OF REACH OF CHILDREN.

Contains: Blend of Petroleum Oils. First Aid Treatment: If Swallowed: Do NOT induce vomiting. If affected person is fully conscious, give one glass of water to drink. Never give anything by mouth to an unconscious person. Get medical attention if symptoms appear. In Eyes: Flush eyes for 30 minutes with water. Get medical attention if irritation persists. On Skin: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly by washing with mild soap and water or a waterless hand cleaner. If irritation or redness develops and persists, seek medical attention. If Inhaled: Move exposed persons to fresh air. Consult medical personnel if breathing issues occur. Safety Data Sheet available upon request.

A dirty engine & poor quality gasoline can lead to a loss of power & fuel economy. MotorKote®  Hyper Octane Boost™ in every tank of fuel can help: increase octane, combustion, improve overall performance, remove engine knock, improve fuel economy, restore lost power, and improve acceleration.

INCREASES OCTANE 10-30 POINTS

BENEFITS:

• Premium Octane formula
• Makes poor gas drivable and safe for engines
• Highest Legal (EPA approved) limit of MMT for Octane
• Immediately reduces knock, pinging and hesitation
• Recommended for all levels and grades of Gasoline
• Excellent Lead Substitute
• Will not harm catalytic converters
• Safe for all engines and will not void warranties.

RECOMMENDED USAGE:

Add entire contents of bottle to 16 gallons of gas. 1 oz. treats 1 gallon of gasoline. Safe to use in all gasoline engines & blends, including Ethanol. 

Can be used every fill-up. Do NOT use more than recommended treatment ratio.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

High-performance synthetic lubricant with MotorKote technology that protects reels from dirt, grime, and corrosion. Developed specifically for fishing reel components. It provides an extra surface layer of lubrication which will prevent rust and corrosion from forming. A must for saltwater reels.

Keeps reels lasting many years and in pristine operating condition

Directions: Remove Reel cover prior to application. Use the dropper to apply ReelKote™ to all metal parts of Reel. Wipe away all excess.

Contents: 1 oz

MotorKote Universal Power Steering Treatment is a full synthetic specially formulated fluid to eliminate any worry about compatibility issues of your existing power steering fluid. Use in ALL power steering services / exchanges requiring regular power steering fluid or specialty high performance lubricating fluids to replace fluid or lost additive content.

BENEFITS:

• 100% Compatible with Asian, Domestic, German & Electro-hydraulic models
• Helps prevent corrosion,wear and oxidation
• Meets or exceeds OEM requirements
• Contains no seal swells! Often a seal swell agent can cause more problems
• Outstanding high & low temperature performance
• Outstanding shear stability
• Extends power steering system life

RECOMMENDED USAGE:

Top off anytime but do not overfill.  For optimal results replace existing fluid.

WARNING: If CHF fluid is required (some German models) flush and replace existing fluid with full recommended amount of Motorkote Universal Power Steering Treatment, see owners manual for fluid type and size.

MotorKote Ultimate 40/60 Synthetic Hyper Mix 5W-30

MotorKote® Ultimate™ is designed for constant MotorKote® protection. This advanced formulation includes MotorKote® Hyper Lubricant® AMERICA'S #1 FRICTION FIGHTER™ plus the highest quality full synthetic 5W-30 MotorKote® Supreme Max™ engine oil. This ILSAC GF-5 approved synthetic motor oil for gasoline engines meets or exceeds the most current API SN licensed manufacturer specifications. These specs are also backward compatible with all older API gas-powered engine specifications such as SM, SL, and SJ.

• Reduces friction & heat

• Helps improve fuel economy

• Provides superior engine wear protection & detergent cleaning capabilities

• Helps keep surfaces free of deposits & sludge buildup

• Helps protect against thermal breakdown

This product is fully compatible with all other MotorKote® products and with all gasoline formulated motor oils including regular (conventional), synthetic and synthetic blends.

USE IN GAS ENGINES ONLY:

Replace 2 quarts of oil with one full (2 qt) bottle of MotorKote® Ultimate™ each oil change. Every 3rd oil change, add the traditional MotoKote® Hyper Lubricant Treatment, 2 oz per quart, plus MotorKote® Ultimate™ for Ultimate MotorKote® protection. Adding MotorKote Ultimate makes regular (conventional) motor oil a semi-synthetic blend and will maintain synthetic oil when used every oil change. It can also be used as a 100% motor oil replacement.

Satisfaction guaranteed or your money back.

14 oz. MotorKote® Sticky Red Grease™ is a premium NLGI #2, heavy-duty, EP multi-purpose lithium grease fortified with polymers, antiwear agents, tackiness additives, high viscosity base oils plus rust and oxidation inhibitors. This grease is designed to stay-in-place and lubricate under the most severe operating conditions found in industrial and automotive service (worst conditions of water, dirt, and mud). It is unsurpassed in resisting water washout and protecting against wear in shock-loading applications.

STAYS-IN-PLACE & LUBRICATES

• Unexcelled water wash-out Resistance due to high-viscosity Base oils fortified with polymers
• Excellent protection against failures caused by shock loading
• Extreme pressure protection exceeds 70 pounds ok load in the ASTM d-2509 Timken test Critical metal surface of moving parts are protected from rust & corrosion
• The distinctive red color quickly identifies the grease and helps detect defective bearing seals
• Helps extend equipment life Oxidation inhibitors permit operations up to 302 °f
• For extended periods NlGI certified GC-LB in Wheel bearing & chassis application

RECOMMENDED APPLICATIONS:

Wheel bearings, including disc brake applications, fifth wheel, u-joints, steering linkage, and chassis lubrication.

An ideal chassis lubricant for "on & off-road" equipment in agriculture, construction, logging, trucking and mining service where severe water washing or shock loading protection is needed.

Also recommended for rock crushers, sand and gravel screens, oil field equipment, off-shore drilling equipment and marine deck equipment.

Recommended for industrial plain bearings and anti-friction bearings operating under shock-loads or wet and dirty conditions.

-

NOT RECOMMENDED for small anti-friction bearings operation over 5000 rpm.

NOT RECOMMENDED for centralized dispensing system commonly found in industrial plants unless they are capable of pumping a grease of this type. Tackiness additives used to make this grease “stay-in-place” and make this grease hard to pump and may require the use of a heavy follower plate and/or more powerful pump in air operated grease pumping systems.

HOW TO USE:

Remove old grease & follow Manufacturer’s Application recommendations.

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

MotorKote® Cetane Jolt™ delivers an increase in cetane number to your diesel fuel.

BENEFITS:

Improves combustion by reducing ignition delay period resulting in:

• Easier cold starting and reduction in white smoke
• Emission reductions
• Reduced noise
• Improved fuel economy

• Effective in all diesel fuels including ULSD and biodiesel blends containing up to 20% biodiesel (B20)

• Ultra Low Sulfur Diesel (ULSD) Compliant Ultra-Concentrated Formula
  

DIRECTIONS: 

Shake well. Pour Diesel Fuel Tank 

• 4 oz (full bottle) per Fuel Tank, up to 40 gallons

FREQUENCY OF USE:

• Every fill-up

This diesel fuel additive complies with the low sulfur content requirements for use in diesel motor vehicles & non-road engines.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. 

MotorKote® 5G Remover™ (Grease+Grime+Grit+Gunk+Goo) is an industrial-strength cleaner & degreaser that safely removes the toughest stuck-on contaminants including grease, grime, grit, gunk, goo, adhesives, engine oil, and more. CAUTION: Wear all safety equipment recommended on the SDS sheet.

Read all directions and cautions prior to beginning work. Before use, in an inconspicuous area, test a small area for colorfastness. DIRECTIONS: Ready-to-use, just spray on and wipe off with a clean microfiber cloth, paper towel, or sponge. No rinse is required.

WILL NOT HARM CLEAR COAT OR PAINTED SURFACES

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to 1,4 Dioxane which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

DON’T REPLACE YOUR FOULED INJECTORS UNTIL YOU TRY THIS FIRST.

100% Guaranteed to Remove Stiction

Injection Stiction occurs when oxidation & carbon build-up form inside (oil-side) the injector. This is related to newer injection technology that runs hotter & causes the oil side of the injector to stick or foul. MotorKote® Diesel Stiction Remover™ removes carbon build-up & provides a coating to eliminate friction in diesel injectors.

BENEFITS:

• Often Restores Fouled Injectors

• Helps Restore Lost Power & Compression

• Fights Deposit Build-up

• Neutralizes Harmful Engine Acids

• Reduces Frictional Drag

• Helps Prevent Excessive Wear

• Helps Prevent Build-up of Harmful Chemical Oxidation

• Helps Reduce Noise & Vibrations in Lifters & Valves

• Reduces Blow-by & Helps Smooth Idle

RECOMMENDED USAGE:

Pickup Truck:

• Prevention replace 32 fl oz of oil 

• Initial cleanup in Pickup Truck replace 64 fl oz of oil with Diesel Stiction Remover®

Semi Truck:
• Initial cleanup in Semi Truck replace 128 fl oz of oil with Diesel Stiction Remover®
• Prevention replace 64 fl oz of oil

DIRECTIONS: 

Shake before using. Pour in Oil / Crankcase. Use every 3rd oil change.

Complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road, locomotive, and marine diesel equipment engines.

100% GUARANTEED to remove stiction within 4,000 miles or you will receive a full refund for the product.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene, and Ethylbenzene which are known to the State of California to cause cancer. For more information go to www.P65Warning

We have a gift card for that person that has everything but also tinkers with everything.  

Shopping for someone else but not sure what to give them? Give them the gift of choice with a MotorKote.com gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

Size guide

A stylish spin on the classic baseball raglan. The combed cotton blend makes it super soft, comfortable, and lightweight.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

-

• MotorKote printed logo
• ¾ sleeve raglan shirt
• 100% ringspun cotton (Heather Grey 90% cotton/10% polyester, Heather Denim 50% cotton/50% polyester)
• Ribbed neckband

Size guide

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production 

• Printed MotorKote logo
• 50% cotton, 50% polyester
• Double-lined hood
• Double-needle stitching throughout
• Air-jet spun yarn with a soft feel and reduced pilling
• 1x1 athletic rib knit cuffs and waistband with spandex
• Front pouch pocket

Size guide

Embroidered MotorKote Logo - This hat is structured with a classic fit, flat brim, and full buckram. The adjustable snap closure makes it a comfortable, one-size-fits-most hat.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

1 - Gallon (128 fl.oz.) Hyper Lubricant 

2  - 16 fl. oz. Fuel Optimizers

This neck gaiter is a versatile accessory that can be used as a face covering, headband, bandana, wristband, and neck warmer.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

• 95% polyester, 5% elastane (fabric composition may vary by 1%)
• Fabric weight: 6.19 oz/yd² (210 g/m²)
• Breathable fabric
• Washable and reusable
• Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains
• One size
• Printed on one side, reverse side is left blank

Caution: Use at your own risk.  Cosmetic use only, not medical grade 

A classic slate gray color snapback with a polyester mesh back trucker style hat with black embroidered MotorKote logo.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

Everyone needs a MotorKote hoodie to stay warm, so go for one that's soft, smooth, and stylish.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

Printed MotorKote logo

• 50% cotton, 50% polyester
• Double-lined hood
• Double-needle stitching throughout
• Air-jet spun yarn with a soft feel and reduced pilling
• 1x1 athletic rib knit cuffs and waistband with spandex
• Front pouch pocket

Size guide

Classic snapback MotorKote trucker cap style with a stay-cool fabric blend and embroidered MotorKote logo.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production 

• Made from a strong metallic material, this durable pin is finished with enamel to preserve the graphic details! This pin is the ideal size for sporting on your backpack, jacket, or hat!
• Now you can take your MotorKote support with you wherever you go!
• Excellent Lapel pin for suits, be sure to always wear on left side.
• 1.75" Length by .25 " Width

This neck gaiter is a versatile accessory that can be used as a face covering, headband, bandana, wristband, and neck warmer.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

• 95% polyester, 5% elastane (fabric composition may vary by 1%)
• Fabric weight: 6.19 oz/yd² (210 g/m²)
• Breathable fabric
• Washable and reusable
• Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains
• One size
• Printed on one side, reverse side is left blank

Caution: Use at your own risk.  Cosmetic use only, not medical grade 

• GREAT DIY ACCESSORY -  DIY embroidered patch with exquisite and bright-colored outlook, perfect for Shirts, hats, uniforms and jackets
• APPLICATION: widely used to decorate and repair jean jacket, shirts, shoes, bags, hats, etc
• IRON ON PATCH: There is glue on the back of the patch.You need to iron on or sew it on your clothes or using other tools
• Environmental protection material: no harm to our skin and environmentally friendly. If there are broken holes or scars on clothes, you can use these patches to cover, and the bright colors and special patterns make them more attractive
• 100% SATISFACTION WARRANTY – If for some reason you are not happy with your iron on patches, you can return them for a full refund no questions ask NOTE: It cannot be applied to waterproof material, plastic material or any hard fabric or cases, it may be easy to fall off.

A snug, form-fitting beanie. It's a must-have for working outside in the cold.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

This neck gaiter is a versatile accessory that can be used as a face covering, headband, bandana, wristband, and neck warmer.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: 

• 95% polyester, 5% elastane (fabric composition may vary by 1%)
• Fabric weight: 6.19 oz/yd² (210 g/m²)
• Breathable fabric
• Washable and reusable
• Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains
• One size
• Printed on one side, reverse side is left blank

Caution: Use at your own risk.  Cosmetic use only, not medical grade 

This neck gaiter is a versatile accessory that can be used as a face covering, headband, bandana, wristband, and neck warmer.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: 

• 95% polyester, 5% elastane (fabric composition may vary by 1%)
• Fabric weight: 6.19 oz/yd² (210 g/m²)
• Breathable fabric
• Washable and reusable
• Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains
• One size
• Printed on one side, reverse side is left blank

Caution: Use at your own risk.  Cosmetic use only, not medical grade 

This neck gaiter is a versatile accessory that can be used as a face covering, headband, bandanna, wristband, and neck warmer.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: 

• 95% polyester, 5% elastane (fabric composition may vary by 1%)
• Fabric weight: 6.19 oz/yd² (210 g/m²)
• Breathable fabric
• Washable and reusable
• Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains
• One size
• Printed on one side, reverse side is left blank

Caution: Use at your own risk.  Cosmetic use only, not medical grade 

MotorKote logo embroidered work apron - The neck loop and long ties, two front pockets, and intricate embroidery in front all come together in an eye-catching and comfy accessory.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

This neck gaiter is a versatile accessory that can be used as a face covering, headband, bandana, wristband, and neck warmer. 

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

• 95% polyester, 5% elastane (fabric composition may vary by 1%)
• Fabric weight: 6.19 oz/yd² (210 g/m²)
• Breathable fabric
• Washable and reusable
• Four-way stretch fabric that stretches and recovers on the cross and lengthwise grains
• One size
• Printed on one side, reverse side is left blank

Caution: Use at your own risk.  Cosmetic use only, not medical grade 

Protect yourself from the elements with this Champion packable jacket. This wind and rain resistant polyester jacket with a detailed embroidery design has a practical hood, front kangaroo pocket, and zipped pouch pocket which you can pull out and use to scrunch the jacket into for convenient storage.

NOTE - This product is made by a 3rd party supplier and will ship separately.

• Estimated fulfillment/production: 1-2 weeks
• Flat Rate Shipping: Additional 3-4 days after production

• 100% polyester micro poplin
• Wind and rain resistant
• Half zip pullover with a hood
• Front kangaroo pocket
• Hidden zipped pouch pocket
• Packable in the zipped pouch pocket
• Adjustable bungee draw cord at hood and bottom hem
• Elastic cuffs
• Embroidered “C” logo on the left sleeve

Size guide