Q: Where is MotorKote made and manufactured?
A: MotorKote is made in the USA.
Q: How does MotorKote® Hyper Lubricant® work?
A: MotorKote® Hyper Lubricant® bonds to metal, creating an extra surface layer of lubrication, adding protection from metal-to-metal contact. This reduces friction and heat which is a major cause of engine wear. MotorKote® Hyper Lubricant® is different than traditional additives such as Lucas® Heavy Duty Oil Stabilizer™, which treats the oil not the engine. Horsepower usually increases after using MotorKote® Hyper Lubricant®. Fuel economy often increases, according to testimonials users may see increases of 5-15%.
Q: How do I use MotorKote® Hyper Lubricant®?
A: The traditional usage amount of MotorKote® Hyper Lubricant® is 2 ounces per quart of motor oil, in any size engine. MotorKote® Hyper Lubricant® should be used in all gasoline and diesel engines. Pour using the directions below.
Engine Oil Crankcase
Amount of Hyper Lubricant: 2 ounces per quart of oil
Frequency: Every other oil change or more often for best fuel economy (due to change in the manufactures extended oil change intervals.)
Transmission or Differentials
Amount of Hyper Lubricant: 1 ounce per quart of fluid. Do NOT use in Continuously Variable Transmissions (CVTs).
Frequency: If fluid levels are low or at time of fluid flush
Amount of Hyper Lubricant: 1-2 ounces total
Frequency: As needed or if noisy
2 Cycle Engines
Amount of Hyper Lubricant: 1 ounce for every 2.5 Gallons of Fuel/ 2 Cycle mix. Note You still need to use your 2-cycle oil
Please note: MotorKote Fuel Optimizer works exceptionally in all 2 cycle engines including lawn mowers, chainsaws, snow blowers, weed eaters, marine equipment and generators.
Q: When can I use MotorKote® Hyper Lubricant®?
A: The best time to use MotorKote® Hyper Lubricant® is with your next oil change, but you can add anytime. In new vehicles - we recommend waiting to install Motorkote® Hyper Lubricant® until a period past the new car warranty period. This is because many OEM’s have made the warranty process difficult when the consumer uses an additive.
Q: Why is MotorKote® Hyper Lubricant® more expensive than some other additives?
A: MotorKote® Hyper Lubricant® is a very concentrated premium lubricant. It also doesn’t need to be added as often and it really works.
Q: Is MotorKote® Hyper Lubricant® safe for wet clutch applications such as motorcycles?
A: You can use a very small amount no more than 1 oz per quart of oil. You do want some friction, so adding too much MotorKote® Hyper Lubricant® could make your wet clutch slip.
Q: Is MotorKote® Hyper Lubricant® safe to use with Full Synthetic Oil?
A: MotorKote works with all oil types (synthetic /conventional / blends), weights, and viscosity, in both gas and diesel engines.
America's #1 Friction Fighter
MotorKote® Hyper Lubricant®
• Is safe & effective, period.
• Does NOT contain PTFE, silicone, graphite, molybdenum, or any other harmful substrate chemicals.
• Has NO long or short term corrosive effect on metal.