More than an oil treatment
MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. MotorKote uses engine oil as a carrier host to get to metal parts and bond to metal.
Works with all oil types (synthetic /conventional / blends), weights, and viscosity, in both gas and diesel engines.


How to Use
Can be added at anytime not just at oil changes.
Use in engines, transmissions, differentials, power steering, transfer cases & more.
* In new vehicles - we recommend waiting to install Motorkote® Hyper Lubricant® until a period past the new car warranty period.
Wet Clutch Application (Including Motorcycles): Use no more than 1 oz per qt of oil. You do want some friction so adding too much Hyper Lubricant could make your wet clutch slip.
Do NOT use in:
• Brakes
• Radiators
• CVTs (continuously variable transmissions)

How Much to Use
• 2 oz per qt of oil in engines/crankcases every other oil change. Or more frequently for optimal results.
• 1 oz per qt of fluid for transmissions (except CVTs), differentials and power steering. Can be added anytime or at fluid service interval. Use annually.
• 1 oz per qt of fluid in motorcycles.
2 Cycle Engines
1 ounce for every 2.5 Gallons of Fuel/2Cycle mix. Note You still need to use your 2-cycle oil.
Please note: MotorKote Fuel Optimizer works exceptionally in all 2 cycle engines including lawn mowers, chainsaws, snow blowers, weed eaters, marine equipment and generators.

Can I use in my transmission?
Can be added anytime or at fluid service interval, in automatic & manual transmissions. Please check fill levels and don't overfill
Do NOT use in continuously variable transmissions (CVT).
How to Use MotorKote Hyper Lubricant in a Bypass Oil Filtration System
1. Know Your Total Oil Capacity
In a bypass system, your oil volume will be higher than stock. Let’s say your truck holds 12 quarts total (including bypass filter capacity).
2. Use the Correct Dosage
Add: 1 oz per quart of oil (initial treatment) of MotorKote Hyper Lubricant
Example: 12 oz of MotorKote Hyper Lubricant
3. When to Add It
Best time to add MotorKote:
- Oil change, when you’re also changing both the full-flow and bypass filters
- After you’ve filled with fresh oil
NOTE: Do NOT pour MotorKote into the bypass filter canister or housing. Always add directly to the engine oil fill port (crankcase).
4. MotorKote doesn’t require any special procedure. Just start the engine and let it circulate.
5. Oil Analysis Users: Monitor Trends
If you run oil analysis, you should see:
- Lower wear metals (especially iron and aluminum)
- Extended oil life (due to added lubricity and film strength)
Have other questions? Click on the FAQs page or shoot us a message. FAQs
America's #1 Friction Fighter
MotorKote® Hyper Lubricant®
• Is safe & effective, period.
• Does NOT contain PTFE, silicone, graphite, molybdenum, or any other harmful substrate chemicals.
• Has NO long or short term corrosive effect on metal.
* New Vehicles: We recommend postponing the installation of MotorKote® Hyper Lubricant® until after the manufacturer’s new car warranty has expired.
Need a Fuel Treatment?

