Products

Made for metal-to-metal friction, MotorKote® All-Purpose Spray Lubricant made with MotorKote® Hyper Lubricant® AMERICA'S #1 FRICTION FIGHTER™ and is a superior solution to help prevent friction, wear, noise, rust & corrosion on metal parts.

Resists water washout and lasts much longer than basic all-purpose spray lubricants and lubricates just about anything.

Designed to reduce friction in hundreds of conditions, it soaks into many surfaces adding a layer of lubrication.

Works in extreme heat & cold. 

DO NOT use in any brake systems or on low-grade plastics and rubber.

INFINITE USES: 

SMALL ENGINES / MOTORS / MECHANICAL MOVEMENTS / TRANSMISSIONS / TRANSFER CASES / GEARS / WET-CLUTCHES / ALL- PURPOSE LIGHTWEIGHT OIL / REPLACES 3-IN-1 OIL & OTHER GENERAL ALL-PURPOSE OILS / CUTTING OIL / INTRICATE MECHANISM LUBRICANT / GUN OIL   / SHOP LUBRICANT / GENERAL PURPOSE LUBRICANT  / SCISSORS / VALVES / BELTS / ELECTRICAL CONNECTIONS / LOCKS / HINGES / DOORS / WINDOWS / GATES / DRAWERS / FANS / ELECTRICAL MOTORS / DRILL BITS / MODELS / ARTS & CRAFTS / AIR / MARINE / RAIL / OFF-ROAD / INDUSTRIAL / EMERGENCY AND OTHER TRANSPORTATION VEHICLES / DEVICES OR EQUIPMENT / RACING / HEAVY DUTY  / EXTREME CONDITIONS / GAS, DIESEL, ALCOHOL, STEAM & ELECTRIC ENGINE APPLICATIONS

* Please note a small amount of foam often is dispensed on new cans, this due to the higher percentage of propellant that has risen to the valve of the can, for best use keep cans at room temperature not cold/frozen 

DIRECTIONS: Hold upright, press firmly on spray nozzle, apply where needed.

PINPOINT APPLICATION: Firmly insert extension tube into the hole in the spray nozzle.

TEST SMALL INCONSPICUOUS AREAS: May harm low-grade plastics and rubbers. It can also stain or discolor fabric.

Now Available for sale in California.

KEEP OUT OF REACH OF CHILDREN.

DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED OR INHALED. VAPOR HARMFUL. CONTENTS UNDER PRESSURE. Do not spray near sparks, heat, or open flame. Vapor may ignite explosively. Do not smoke. Extinguish all flames, electronic motors, and other sources of ignition during use and until vapors are gone. Do not puncture or incinerate the container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not store at temperatures above 120º F. Use adequate ventilation. Do not breathe vapors or spray mist. Do not induce vomiting. Call a physician immediately. Avoid contact with eyes, skin and clothing. Safety data sheet available on request. FIRST AID: Contains (CAS#): Heptane (142-82-5), Petroleum Distillate (6472-47-8) Isobutane (78-28-5) Propane (74-98-6). It can also stain or discolor fabric. 

Motorkote® Reach™ is an industrial grade foaming glass cleaner with a power stream nozzle. Designed for areas hard to reach including distances up to 6 feet.

Uses: windshields, stainless steel, mirrors, outdoor furniture, chrome, glass, vinyl. Outdoor use recommended but not required.

• Safely reaches where others can’t

• Great for Big Rigs, RVs, Trailers, SUVs

• Covers hard to reach areas from one safe position without climbing

• Will not streak or harm surfaces

• Works with just wiper blades

Directions: Shake well. Stand back Approximately 3 ft, preferably in non-enclosed area, overspray will occur but dissipate, spray surface and use wiper blades, soft cloth or paper towel while foam still present. Repeat if necessary. For interior windshields, spray on cloth in close range first, not directly to glass as overspray will occur. Will not harm clear coat or painted surfaces.

14 oz. Motorkote® ShopKlean™ is an industrial strength cleaner recommended for cleaning and degreasing the toughest contaminants including grease, oil, brake fluid, grime, adhesives, and others.

• Non-chlorinated
• Fast cleaning & drying action
• Cleans & degreases the toughest contaminants
• Gret for grease, oil, brake fluid, grime, adhesives & more
• Meets or exceeds all 50 state VOC requirements

Uses: shop/garage floors, all metal parts, tools, automotive engine parts, metal brake parts.

Test small area on all plastics and laminated surfaces first.

Directions: Shake well. Read entirely first. Do not use on any machinery while in operation. Do not spray on rubber brake parts, wheels, rims, or any painted surfaces. Stand back approximately 2 ft. In an outdoor or well-ventilated area. Avoid breathing any dust or vapor that becomes airborne.

Test spray a small area first, wait until the area is covered lightly, and then continue spraying. Let the area air dry or use a clean cloth. Repeat for heavier duty jobs.

⚠️WARNING: This product can expose you to chemicals including Benzene which is known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.