All Products

Buy at O'Reilly Auto Parts > 

1 gallon (128 fl oz) 

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

MotorKote Heavy Duty Motor Treatment is to be used in all gas, diesel, ethanol fuels, and in engine oil crankcases. 

• Cleans & removes harmful carbon deposits, gums, & varnishes

• Removes moisture from fuel & oil

• Restores lost performance

• With added fuel stability protection

100% pure petroleum product treats both gasoline & diesel engines including 2 & 4 cycle engines, carburetors, fuel injected gasoline engines, automobiles, trucks, boats / marine, tractors, motorcycles, lawn & garden machinery and industrial engines.

• Removes fuel system deposits and residues 

• Cleans fuel injectors & carburetor jets

• Stabilizes & conditions fuels - use for

• engine storage (lasts up to 2 years)

• Cures hesitations, stalls, pings & rough idle

• due to carbon buildup

• Frees sticking /noisy lifters & rings

• Cleans PCV valve system

• Increases RPM’s vacuum & compression

• Lubricates upper cylinders

• Helps de-ice fuel

• Cleans intake valves & pistons

• Removes catalytic converter odors

• EPA registered

Will not harm engine components, catalytic  converters, seals, gaskets, or oxygen sensors

DIRECTIONS:

CRANKCASE - INTERNAL ENGINES USE ONLY. DOES NOT REPLACE OIL. 

Works with all types of oil: Conventional, Semi & Full Synthetics

Treats up to 10 quarts of oil - 1.5 oz. per quart 

FUEL TANK

16 oz. treats up to 25 gallons of fuel

1 oz. per gallon ( Gas & Diesel )

SMALL ENGINES - 2 & 4 Cycle Engines

1 oz. per gallon ( Gas & Oil Mix )

DOES NOT REPLACE 2 CYCLE OIL.

VACUUM INTAKE CLEANER

May be used with engine decarbonizing equipment through the vacuum system to clean intake manifold, valves and combustion chamber. Follow recommended mechanical procedures for the equipment.

FREQUENCY OF USE

Every 3,000-5,000 miles

CONTENTS HARMFUL. CONTENTS MAY CATCH FIRE. MAY IRRITATE SKIN AND EYE. Do not swallow. Do not smoke. Do not mix with other chemicals. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. KEEP OUT OF REACH OF CHILDREN. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Keep away from flames, such as a pilot light, and any object that sparks, such as an electric motor. To open-push tabs and twist left. To close-twist right until tight. FIRST AID: Contains petroleum distillates and isopropanol. If swallowed, call a doctor or Poison Control immediately (800) 222-1222. Do not induce vomiting. If in eyes, flush with water for 15 minutes, removing contact lenses (if present), after the first 5 minutes. If on skin, wash thoroughly with soap and water. If inhaled, move to fresh air. If irritation persists for any exposure, call a physician. 

Warnings:

Proposition 65 Warning for California Consumers: Fuel Optimizer

⚠️WARNING: This product can expose you to chemicals including Benzene, Ethylbenzene, which are known to the State of California to cause cancer and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

DON’T REPLACE YOUR FOULED INJECTORS UNTIL YOU TRY THIS FIRST.

100% Guaranteed to Remove Stiction

Injection Stiction occurs when oxidation & carbon build-up form inside (oil-side) the injector. This is related to newer injection technology that runs hotter & causes the oil side of the injector to stick or foul. MotorKote® Diesel Stiction Remover™ removes carbon build-up & provides a coating to eliminate friction in diesel injectors.

BENEFITS:

• Often Restores Fouled Injectors

• Helps Restore Lost Power & Compression

• Fights Deposit Build-up

• Neutralizes Harmful Engine Acids

• Reduces Frictional Drag

• Helps Prevent Excessive Wear

• Helps Prevent Build-up of Harmful Chemical Oxidation

• Helps Reduce Noise & Vibrations in Lifters & Valves

• Reduces Blow-by & Helps Smooth Idle

RECOMMENDED USAGE:

• Initial cleanup in Pickup Truck replace 64 fl oz of oil with Diesel Stiction Remover®
• Prevention replace 32 fl oz of oil
• Initial cleanup in Semi Truck replace 128 fl oz of oil with Diesel Stiction Remover®
• Prevention replace 64 fl oz of oil

DIRECTIONS: 

Shake before using. Pour in Oil / Crankcase. Use every 3rd oil change.

Complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road, locomotive, and marine diesel equipment engines.

100% GUARANTEED to remove stiction within 4,000 miles or you will receive a full refund for the product.

Warnings:

Proposition 65 Warning for California Consumers:

⚠️WARNING: This product can expose you to chemicals including Naphthalene, and Ethylbenzene which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

MotorKote® Heavy Duty Oil Stabilizer - 1 QT / 32 FL OZ  (946 mL)

ITEM # MK-50960-06

• Helps Eliminate Dry Starts
• Reduces Smoking, Knocking & Oil Consumption in Worn Engines
• Compatible With Synthetic & Non-synthetic Automotive Lubricants
• Uses Cold Fusion Technology
• Can Be Used in Conjunction with Motorkote® Hyper Lubricant

100% pure petroleum product increases oils viscosity and is safe in all gasoline and diesel engines while adding lubricity to any type of oil. Using MotorKote Heavy Duty Oil Stabilizer regularly will help extend engine life, resist thermal breakdown, lower oil temperatures, raise oil pressure and reduce oil consumption and improve fuel economy. Cold Fusion Technology is an advanced pour point depressant that allows for better flow and performance during lower temperatures. 

DIRECTIONS  

ENGINE OIL CRANKCASE:

1 quart with every 4 quarts motor oil.

FREQUENCY OF USE:

Every oil change - Can be used in conjunction with motorkote hyper lubricant.

OTHER USES:

Use up to 20% of system capacity for light duty manual transmissions, lawnmowers, and air compressors.

Use up to 50% of system capacity for heavy duty transmissions, differentials, and transfer cases.

KEEP OUT OF REACH OF CHILDREN.

Contains: Blend of Petroleum Oils. First Aid Treatment: If Swallowed: Do NOT induce vomiting. If affected person is fully conscious, give one glass of water to drink. Never give anything by mouth to an unconscious person. Get medical attention if symptoms appear. In Eyes: Flush eyes for 30 minutes with water. Get medical attention if irritation persists. On Skin: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly by washing with mild soap and water or a waterless hand cleaner. If irritation or redness develops and persists, seek medical attention. If Inhaled: Move exposed persons to fresh air. Consult medical personnel if breathing issues occur. Safety Data Sheet available upon request.

MotorKote Ultimate 40/60 Synthetic Hyper Mix 5W-30

MotorKote® Ultimate™ is designed for constant MotorKote® protection. This advanced formulation includes MotorKote® Hyper Lubricant® AMERICA'S #1 FRICTION FIGHTER™ plus the highest quality full synthetic 5W-30 MotorKote® Supreme Max™ engine oil. This ILSAC GF-5 approved synthetic motor oil for gasoline engines meets or exceeds the most current API SN licensed manufacturer specifications. These specs are also backward compatible with all older API gas-powered engine specifications such as SM, SL, and SJ.

• Reduces friction & heat

• Helps improve fuel economy

• Provides superior engine wear protection & detergent cleaning capabilities

• Helps keep surfaces free of deposits & sludge buildup

• Helps protect against thermal breakdown

This product is fully compatible with all other MotorKote® products and with all gasoline formulated motor oils including regular (conventional), synthetic and synthetic blends.

USE IN GAS ENGINES ONLY:

Replace 2 quarts of oil with one full (2 qt) bottle of MotorKote® Ultimate™ each oil change. Every 3rd oil change, add the traditional MotoKote® Hyper Lubricant Treatment, 2 oz per quart, plus MotorKote® Ultimate™ for Ultimate MotorKote® protection. Adding MotorKote Ultimate makes regular (conventional) motor oil a semi-synthetic blend and will maintain synthetic oil when used every oil change. It can also be used as a 100% motor oil replacement.

Satisfaction guaranteed or your money back.