- Made from a strong metallic material, this durable pin is finished with enamel to preserve the graphic details! This pin is the ideal size for sporting on your backpack, jacket, or hat!
- Now you can take your MotorKote support with you wherever you go!
- Excellent Lapel pin for suits, be sure to always wear on left side.
- 1.75" Length by .25 " Width
You may also like




Made for metal-to-metal friction, MotorKote® All-Purpose Spray Lubricant made with MotorKote® Hyper Lubricant® AMERICA'S #1 FRICTION FIGHTER™ and is a superior solution to help prevent friction, wear, noise, rust & corrosion on metal parts.
Resists water washout and lasts much longer than basic all-purpose spray lubricants and lubricates just about anything.
Designed to reduce friction in hundreds of conditions, it soaks into many surfaces adding a layer of lubrication.
Works in extreme heat & cold.
DO NOT use in any brake systems or on low-grade plastics and rubber.
INFINITE USES:
SMALL ENGINES / MOTORS / MECHANICAL MOVEMENTS / TRANSMISSIONS / TRANSFER CASES / GEARS / WET-CLUTCHES / ALL- PURPOSE LIGHTWEIGHT OIL / REPLACES 3-IN-1 OIL & OTHER GENERAL ALL-PURPOSE OILS / CUTTING OIL / INTRICATE MECHANISM LUBRICANT / GUN OIL / SHOP LUBRICANT / GENERAL PURPOSE LUBRICANT / SCISSORS / VALVES / BELTS / ELECTRICAL CONNECTIONS / LOCKS / HINGES / DOORS / WINDOWS / GATES / DRAWERS / FANS / ELECTRICAL MOTORS / DRILL BITS / MODELS / ARTS & CRAFTS / AIR / MARINE / RAIL / OFF-ROAD / INDUSTRIAL / EMERGENCY AND OTHER TRANSPORTATION VEHICLES / DEVICES OR EQUIPMENT / RACING / HEAVY DUTY / EXTREME CONDITIONS / GAS, DIESEL, ALCOHOL, STEAM & ELECTRIC ENGINE APPLICATIONS
* Please note a small amount of foam often is dispensed on new cans, this due to the higher percentage of propellant that has risen to the valve of the can, for best use keep cans at room temperature not cold/frozen
DIRECTIONS: Hold upright, press firmly on spray nozzle, apply where needed.
PINPOINT APPLICATION: Firmly insert extension tube into the hole in the spray nozzle.
TEST SMALL INCONSPICUOUS AREAS: May harm low-grade plastics and rubbers. It can also stain or discolor fabric.
Now Available for sale in California.
KEEP OUT OF REACH OF CHILDREN.
DANGER: EXTREMELY FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED OR INHALED. VAPOR HARMFUL. CONTENTS UNDER PRESSURE. Do not spray near sparks, heat, or open flame. Vapor may ignite explosively. Do not smoke. Extinguish all flames, electronic motors, and other sources of ignition during use and until vapors are gone. Do not puncture or incinerate the container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not store at temperatures above 120º F. Use adequate ventilation. Do not breathe vapors or spray mist. Do not induce vomiting. Call a physician immediately. Avoid contact with eyes, skin and clothing. Safety data sheet available on request. FIRST AID: Contains (CAS#): Heptane (142-82-5), Petroleum Distillate (6472-47-8) Isobutane (78-28-5) Propane (74-98-6). It can also stain or discolor fabric.
MotorKote® Fuel Optimizer® was formulated to offset the diminishing quality of fuel and remove harmful deposits that rob your injectors of power and performance. Helps your fuel burn CLEANER AND HOTTER for better fuel economy and performance.
Fuel quality from just a few years ago has deteriorated. The introduction of lower octane substitutes increased ethanol, and fuel falling out of solution has left drivers with an uneasy feeling at the pump. Most fuels are manufactured to “generally good performance in most cars”.
MotorKote® Fuel Optimizer® was formulated to offset the diminishing quality of fuel and remove harmful deposits that rob your injectors of power and performance. Helps your fuel burn CLEANER AND HOTTER for better fuel economy and performance.
It goes into the fuel tank in both gas and diesel engines and cleans your fuel system.
Also an Excellent solution for marine equipment, motorcycles, and all 2-4 stroke engines.
BENEFITS
-
Helps fight and remove condensation, which causes bacteria and algae in fuel tanks
-
Raises octane
-
Decreased Ignition Delay
-
Reduces carbon build up the cause of Pre-ignition, power loss, burned valves, broken rings
-
Fights gelling and waxingAdds horsepower and torque
-
Increases fuel efficiency
-
Cleans injectors to Reduce: Power loss, hesitations, pinging/dieseling, loss of fuel economy
MotorKote Fuel Optimizer is safe for use in all catalytic converters when used as directed.
RECOMMENDED USAGE:
Add 1 oz per 10 gals. of gasoline every 3rd to 4th fill-up on most passenger vehicles. Larger (Diesel) engines use the same amount every fill-up. 2 oz. per gal of fuel prior to storing equipment or fuel tanks for the season. 2 Stroke mixtures add 1 oz of Fuel Optimizer following 2 stroke & Fuel mix.
Can be used with MotorKote Low Sulfur Lube in Diesel engines, alternate products between fill-ups.
Warnings:
Proposition 65 Warning for California Consumers:
⚠️WARNING: This product can expose you to chemicals including Benzene, Ethylbenzene, Naphthalene which are known to the State of California to cause cancer, and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1 gallon (128 fl oz)
AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.
Benefits:
- Increases horsepower, lowers operating temperatures, and helps reduce engine noise and vibration.
- Specifically formulated for heavy-duty high temp engines
- Works with all brands of synthetic and petroleum-based oils
- Works in gas or diesel engines instantly
- Works in crankcases, transmissions (except CVTs), differentials, and power steering (see usage amounts below)
- Lasts 4 oil changes, but best fuel economy savings have been noted with more frequent use.
- We recommend waiting to install Motorkote® Hyper Lubricant® until a period past the new car warranty period.
Recommended Usage:
• Can be added at anytime not just at oil changes
• 2 oz per qt of oil in engines/crankcases
• 1 oz per qt of fluid for transmissions (except CVTs), differentials, and power steering
• 1 oz per qt of fluid in motorcycles
Do NOT use in:
• Brakes
• Radiators
• CVTs (continuously variable transmissions).
AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.
Benefits:
- Increases horsepower, lowers operating temperatures, and helps reduce engine noise and vibration.
- Specifically formulated for heavy-duty high temp engines
- Works with all brands of synthetic and petroleum-based oils
- Works in gas or diesel engines instantly
- Works in crankcases, transmissions (except CVTs), differentials, and power steering (see usage amounts below)
- Lasts 4 oil changes, but best fuel economy savings have been noted with more frequent use.
- We recommend waiting to install Motorkote® Hyper Lubricant® until a period past the new car warranty period.
Recommended Usage:
• Can be added at any time not just at oil changes
• 2 oz per qt of oil in engines/crankcases
• 1 oz per qt of fluid for transmissions (except CVTs), differentials, and power steering
• 1 oz per qt of fluid in motorcycles
Do NOT use in:
• Brakes
• Radiators
• CVTs (continuously variable transmissions).
Motorkote® Reach™ is an industrial grade foaming glass cleaner with a power stream nozzle. Designed for areas hard to reach including distances up to 6 feet.
Uses: windshields, stainless steel, mirrors, outdoor furniture, chrome, glass, vinyl. Outdoor use recommended but not required.
• Safely reaches where others can’t
• Great for Big Rigs, RVs, Trailers, SUVs
• Covers hard to reach areas from one safe position without climbing
• Will not streak or harm surfaces
• Works with just wiper blades
Directions: Shake well. Stand back Approximately 3 ft, preferably in non-enclosed area, overspray will occur but dissipate, spray surface and use wiper blades, soft cloth or paper towel while foam still present. Repeat if necessary. For interior windshields, spray on cloth in close range first, not directly to glass as overspray will occur. Will not harm clear coat or painted surfaces.
MOTORKOTE 14 oz Extreme Pressure Grease is designed to provide excellent lubrication qualities over a wide range of temperatures
BENEFITS
-
Unequalled water washout resistance
-
Melting point well above 500 Degrees F
-
Extreme pressure protection 70 lb. on Timken OK load test
-
Rust and corrosion inhibited to protect metal surfaces
Heavy duty braking applications, disc brakes, all purpose areas, grease guns (excellent pumpability), fifth wheels, U-joints, steering linkage, chassis lubricant, Recommended for all types of bearings including plain bearings, heavily loaded journal bearings, ball and roller bearings, needle bearings and couplings