All Products

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

AMERICA'S #1 FRICTION FIGHTER™ MotorKote® Hyper Lubricant® is a synthetic lubricant that molecularly coats all metal surfaces, not just engines to help reduce friction and heat in many different applications. Hyper Lubricant® uses engine oil as a carrier host to get to metal parts and bond to metal.

MotorKote Heavy Duty Motor Treatment is to be used in all gas, diesel, ethanol fuels, and in engine oil crankcases. 

• Cleans & removes harmful carbon deposits, gums, & varnishes

• Removes moisture from fuel & oil

• Restores lost performance

• With added fuel stability protection

100% pure petroleum product treats both gasoline & diesel engines including 2 & 4 cycle engines, carburetors, fuel injected gasoline engines, automobiles, trucks, boats / marine, tractors, motorcycles, lawn & garden machinery and industrial engines.

• Removes fuel system deposits and residues 

• Cleans fuel injectors & carburetor jets

• Stabilizes & conditions fuels - use for

• engine storage (lasts up to 2 years)

• Cures hesitations, stalls, pings & rough idle

• due to carbon buildup

• Frees sticking /noisy lifters & rings

• Cleans PCV valve system

• Increases RPM’s vacuum & compression

• Lubricates upper cylinders

• Helps de-ice fuel

• Cleans intake valves & pistons

• Removes catalytic converter odors

• EPA registered

Will not harm engine components, catalytic  converters, seals, gaskets, or oxygen sensors

DIRECTIONS:

CRANKCASE - INTERNAL ENGINES USE ONLY. DOES NOT REPLACE OIL. 

Works with all types of oil: Conventional, Semi & Full Synthetics

Treats up to 10 quarts of oil - 1.5 oz. per quart 

FUEL TANK

16 oz. treats up to 25 gallons of fuel

1 oz. per gallon ( Gas & Diesel )

SMALL ENGINES - 2 & 4 Cycle Engines

1 oz. per gallon ( Gas & Oil Mix )

DOES NOT REPLACE 2 CYCLE OIL.

VACUUM INTAKE CLEANER

May be used with engine decarbonizing equipment through the vacuum system to clean intake manifold, valves and combustion chamber. Follow recommended mechanical procedures for the equipment.

FREQUENCY OF USE

Every 3,000-5,000 miles

CONTENTS HARMFUL. CONTENTS MAY CATCH FIRE. MAY IRRITATE SKIN AND EYE. Do not swallow. Do not smoke. Do not mix with other chemicals. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. KEEP OUT OF REACH OF CHILDREN. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Keep away from flames, such as a pilot light, and any object that sparks, such as an electric motor. To open-push tabs and twist left. To close-twist right until tight. FIRST AID: Contains petroleum distillates and isopropanol. If swallowed, call a doctor or Poison Control immediately (800) 222-1222. Do not induce vomiting. If in eyes, flush with water for 15 minutes, removing contact lenses (if present), after the first 5 minutes. If on skin, wash thoroughly with soap and water. If inhaled, move to fresh air. If irritation persists for any exposure, call a physician. 

Warnings:

Proposition 65 Warning for California Consumers: Fuel Optimizer

⚠️WARNING: This product can expose you to chemicals including Benzene, Ethylbenzene, which are known to the State of California to cause cancer and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

MotorKote Universal Power Steering Treatment is a full synthetic specially formulated fluid to eliminate any worry about compatibility issues of your existing power steering fluid. Use in ALL power steering services / exchanges requiring regular power steering fluid or specialty high performance lubricating fluids to replace fluid or lost additive content.

BENEFITS:

• 100% Compatible with Asian, Domestic, German & Electro-hydraulic models
• Helps prevent corrosion,wear and oxidation
• Meets or exceeds OEM requirements
• Contains no seal swells! Often a seal swell agent can cause more problems
• Outstanding high & low temperature performance
• Outstanding shear stability
• Extends power steering system life

RECOMMENDED USAGE:

Top off anytime but do not overfill.  For optimal results replace existing fluid.

WARNING: If CHF fluid is required (some German models) flush and replace existing fluid with full recommended amount of Motorkote Universal Power Steering Treatment, see owners manual for fluid type and size.